SAMSAN Residual Chlorine LCD Type Series

เครื่องตรวจวัดค่าน้ำ SAMSAN รุ่น Residual Chlorine LCD Type Series เครื่องตรวจวัดค่าน้ำ SAMSAN สำหรับตรวจคุณภาพน้ำขั้นสูงพร้อมไมโครโปรเซสเซอร์ ขนาดเล็กกะทัดรัด (96×96 มม.) ฟังก์ชั่นเอนกประสงค์ ออกแบบให้ง่ายต่อการใช้งาน และประสิทธิภาพการทำงานที่มากขึ้น นอกเหนือจากผลการตรวจสอบที่แม่นยำ ด้วยเซ็นเซอร์และอุปกรณ์เสริมทำให้ SAMSAN CONTROLLER สามารถทำหน้าที่เป็นระบบตรวจสอบที่เหมาะสมและคุ้มค่าที่สุดเพื่อตอบสนองการใช้งานในกระบวนการควบคุมคุณภาพน้ำ

SAMSAN Residual Chlorine LCD Type Series​ Water Quality Controllers SAMSAN with microprocessor! Condensed in a compact DIN size(96x96mm), versatile functions provide more simplicity in operation and more efficiency in performance, in addition to accurate monitoring results. With the appropriate sensors and accessaries, SAMSAN CONTROLLER can serve as the most suitable and cost effective monitoring system to meet process, water and control applications.

เครื่องตรวจวัดค่าน้ำ SAMSAN Residual Chlorine LCD Type Series

  • ด้วยฟังก์ชั่นการควบคุมไมโครโปรเซสเซอร์และการออกแบบปุ่มเดียวทำให้การตั้งค่าง่ายมาก
  • ได้รับการออกแบบสำหรับการใช้สัญญาณและการเตือน (DC 4-20mA หรือ 1-5V และอื่น ๆ )
  • ด้วยจอแสดงผลดิจิตอล 3 หรือ 4 หลักการอ่านและการตั้งค่าทำได้ง่ายมากโดยดูจากข้อความแต่ละข้อความ
  • Isolator มีการติดตั้งสำหรับการส่งข้อมูลที่เสถียรด้วย Isolator DC4-20mV, เอาต์พุต 1-5V และคุณสามารถเชื่อมต่อกับคอมพิวเตอร์ส่วนบุคคลและตัวบันทึกข้อมูลโดยตรง
  • ออกแบบมาเพื่อตั้งการเตือน เมื่อค่าสูงและต่ำกว่ากำหนด สำหรับการควบคุมคุณภาพน้ำในกระบวนการจัดการน้ำเสีย
  • ติดตั้งการชดเชยอุณหภูมิอัตโนมัติเพื่อผลลัพธ์และรูปลักษณ์การตรวจสอบที่แม่นยำยิ่งขึ้น
  • ขนาด DIN (96 x 96 มม.) สำหรับการติดตั้งและบำรุงรักษาง่าย
  • ติดตั้งสวิตช์ไฟสำหรับการป้องกันของตัวควบคุมโดยการเปิด / ปิดของแหล่งจ่ายไฟในขณะที่การตั้งค่าหรือ A / S
  • ติดตั้ง EEPROM, SAMSAN CONTROLLER สามารถเก็บค่าที่ตั้งไว้ทั้งหมดของพารามิเตอร์ที่ตั้งไว้ล่วงหน้าในขณะที่ปิดและเมื่อเปิด จะสามารถวัดและตรวจสอบกับค่าทั้งหมดที่ตั้งไว้ก่อนได้

SAMSAN Residual Chlorine LCD Type Series

  • With microprocessor control functions and design of one touch button, you can get more effective, reliable data and very simple setting.
  • Designed for using out-put of signal and alarm (DC 4 -20㎃ or 1~5V and others).
  • With 3 or 4Digit Digital Display, Reading & Setting are very simple by appearance of each message.
  • Isolator is equipped for transmission of stable data with isolated DC4~20㎷, 1~5V output and you can connect with personal computer and data logger directly.
  • Designed to set high and low alarm for controlling of water quality in process, waste water and your applications.
  • Equipped with Automatic Temperature Compensation for more accurate monitoring results and appearance.
  • DIN (96 x 96㎜)size for simple installation and maintenance.
  • Equipped with power switch for protection of controller by ON/OFF of power supply while setting or A/S.
  • Equipped with EEPROM, SAMSAN CONTROLLER can hold all set values of preset parameters while power is OFF and when power become ON, they can continue to measure and monitor with all values set before.

SPECIFICATION

Name RC Indicating Controller(2Relays) RC Indicating Controller(4Relays)
Model samsanK.com-96RC-L2 samsanK.com-96RC-L4
Display(LCD) 0 ~ 5.00 ppm
Measuring Type Galvanic Type
Accuracy Within ±1.5% F.S
Repeatability Within 0.5% F.S
Range Residual Chlorine 0 ~ 5.00 ppm (Resolution:0.01 ppm)
Temperature 0 ~ 100℃
Using Temperature -5℃ ~ 45℃
Using Humidity Less than 90%RH
Temperature Conpensation 0 ~ 100℃
Sensor Calibration ZERO, SPAN Calibration
Power AC85V ~ AC250V / 50/60Hz / Free Voltage
Out-Put Analog Output DC4-20mA / ISOLATION
AUTO HOL—Sensor Cleaning Out-Put
Communication RS-485
Relay(Alarm) 2-RELAY SPDT-Relay AC250V3A MAX. 4-RELAY SPDT-Relay AC250V3A MAX.
Available with Cleaning Out-Put & Time Proportional Out-Put
Power Consumption  Approx. 5VA
Case Mat’ls Case STEEL
Front ABS
Key Pad Membrane
Size 96 X 96 X 110mm
Weight Approx. 0.5kg
Installation PANEL MOUNT TYPE